Hebei Arts Boiler Equipment Co., Ltd.: is specialized in the boiler heat, energy and environmental protection products, complete sets of engineering design, development, science and technology services joint-stock company; is an energy field and wood processing industries heating system to provide heat energy industry service providers and equipment supplier. The main furnace heat to provide quality products to Chinese and global customers in Asia. At present, the products have been sent to sell Southeast Asia, Africa and Europe and other regions and countries. Oil furnace installation requirements 1. Oil furnace foundation construction, according to foundation drawing with the furnace equipment, the basis for determining elevation, depth, label themselves based on local soil conditions and needs. 2. After conducting oil furnace equipment in place, watering bolt, be leveling alignment, then tighten the bolt. 3. Burning hot oil furnace, the furnace should be the base joint of cloth 10-20mm asbestos rope fastening bolts to seal requirements. 4. HTF Furnace and stove seat after connection, you must use masonry bricks and castable refractory furnace tube was sealed, higher than the tube 1-2 turns. Oil furnace oil furnace design and layout requirements 1. Equipment should be arranged to facilitate the operation, access and maintenance. 2. High oil furnace bottom groove at least higher than the roof 1.5m, and shall not be arranged in the oven, just above the high slot capacity of not less than 1.3 times the amount of system expansion. 3. The lower tank should be located at the lowest point of the system shall be separated by a partition with hot oil furnace, the lower tank capacity of not less than 1.2 times the total amount of oil. 4. Oil furnace cabinet should be set at no heat radiation, and should face the operator, easy to observe and maintain. 5. Other devices can be depending on the circumstances, refer to "process map" laid out. 

keywords: Organic heat carrier furnace, molten salt furnace, gas oil boiler,